This blog is to chronicle my metalworking experiences, with a view to expanding my knowledge through discussion via comments.
Over my relatively short time running a lathe and mill, I’ve garnered a lot of information, better techniques, easier ways of doing things and a better knowledge of metalworking.
I’ve made several different parts using my lathe and mill on this page are a few examples, there are more examples on the projects page.

Below is an example of an adaptor ring for a point and shoot camera to a telescope.

This is an adapter that I've madeClose-up of the knurling

Here is an adaptor that connects a Canon Eos 450D to a meade ETX-80 telescope.